Content:
- Filter ventilation unit CFS-90: compact and versatile installation.
- Reliability and compliance with CFS-90 installation standards.
- Filter ventilation unit CFS-90: climate adaptation.
- Other advantages.
A full-fledged shelter is impossible without ensuring an uninterrupted supply of clean air. For this purpose, it will not be enough to create only ordinary supply ventilation. Such a system is ineffective under conditions of high concentrations of pollutants in the atmosphere. Therefore, a filtering unit or, as they are also called, a filter-ventilation unit (FVU) is required. The solution to the problem for a large or medium-sized storage facility can be the CFS-90 model from the Ukrainian manufacturer Selton.
Filter ventilation unit CFS-90: compact and versatile installation
The modern CFS-90 filter unit has a modular design, i.e. it consists of separate functional blocks. Thanks to the well-thought-out content and the use of modern technologies, the air filtration unit is small in size. If necessary, it can be mounted not only outside, outside the perimeter of the building, but also directly indoors. Moreover, the equipment will not take up too much usable space.
Reliability and compliance with CFS-90 installation standards
CFS-90 is a filter-ventilation unit designed to equip shelters and shelters designed for the simultaneous stay of up to 90 people. The volume air flow rate is up to 900 m3/h in the filter ventilation mode. Also, the equipment can be used to provide clean air for office or other buildings, in this mode of operation, the volume flow rate will be 1200 m3/h.
The filter-ventilation unit can operate in two modes:
- ventilation. It is aimed at purifying the air from the main pollutants – dust, other solid and aerosol inclusions, and a number of biological components. In this case, mechanical filter elements are mainly involved;
- filter ventilation. It is most often put into operation in case of emergencies. Absorber filters are connected. This allows for additional purification of air masses from toxic gases, poisonous, chemical warfare agents, etc.
Depending on the needs, the units are equipped with various filtration elements. As a rule, elements of coarse (primary) and fine (secondary) air purification are used. To achieve high (>99.95%) purity, HEPA filters can be used in addition. Carbon absorbent filters absorb toxic substances.
Filter ventilation unit CFS-90: climate adaptation
The CFS-90 air handling unit is capable of not only filtering the air flow and removing pollutants. With the climate control module, the air temperature supplied to the room is adjusted after cleaning. Depending on the needs, additional heating or cooling is performed. This helps to create a comfortable microclimate.
Other advantages
The CFS-90 filter system is manufactured using modern wear-resistant materials and high-quality raw materials for absorbers. This ensures long-term and uninterrupted operation of the ESP. Thus, the service life of mechanical filters is 100 hours of continuous operation. On average, they are replaced once every 6 months. All substances and materials used in production comply with the current standards and regulations of Ukraine. The equipment is certified and is suitable for installation and use in storages and shelters.
Other advantages of the FVU include:
- low sound load when the system is in operation. Even when installed indoors, it will not cause significant discomfort;
- low power consumption. It allows you to economically use available resources. The need for air heating leads to an increase in electricity consumption;
- ease of maintenance, easy replacement of filters;
- the presence of an automation system. The system is able to independently monitor the condition of the air that will be supplied to the
- room and make decisions about the required operating mode. It will also remind you of the need to replace the filters;
- the ability to ensure autonomous operation of the filter-ventilation unit. This is possible by installing an additional energy source.
The filter-ventilation unit is able to provide not only the storage facility with clean and safe air. This is a prerequisite for the creation of such facilities. Selton develops and manufactures filter ventilation units that meet modern needs and current standards. The modular design allows them to be adapted to customer needs. If necessary, the company’s specialists will provide qualified consulting support and help you make the right choice.
